Questa pagina è stata tradotta utilizzando Google Traduttore
Libreria delle specifiche delle apparecchiature
Informazioni di base sul modello
-
Produttore:Vermeer
-
Modello:D80x100 Series II
-
Dimensione dell'attrezzatura:50,001 - 100,000 lbs pullback
Visualizza produttori Visualizza i modelli Torna alla lista
Specificazioni
Informazioni addizionali
-*2015 NOVEMBER*-
GENERAL DIMENSIONS AND WEIGHTS
Length (Minimum Transport): 358" (909.3 cm)
Width (With Cab, Minimum Transport): 93" (236.2 cm)
Height (Minimum Transport): 118" (299.7 cm)
Weight: 42500 lbs (19277.7 kg)
ENGINE
Make and Model: John Deere PowerTech PE6068H200
Fuel Type: Diesel
Maximum Engine RPM: 2400 rpm
Idle Speed: 800 rpm
Rated RPM: 2400 rpm
Gross Horsepower: 200 hp (149.1 kw)
Net Horsepower: 180 hp (134.2 kw)
Torque (Maximum): 569 ft-lb (771 .5 Nm)
Displacement: 415 cu-in (6.8 L)
Number of Cylinders: 6
Cooling Method: CAC air to air
Aspiration: Turbocharged
Max Fuel Consumption: 10.4 gph (39.3 Iph)
Air Cleaner: Donaldson RadialSeal FRG130097
EPA Certification Family: Tier 3
Maximum Operating Angle (Fore/Aft)*: 25 continuous
Maximum Operating Angle (Left/Right)*: 25 continuous
OPERATIONAL
Thrust: 80000 lbs (36287.4 kg)
Pullback: 80000 lbs (36287.4 kg)
Maximum Carriage Speed at Maximum Engine RPM: 175 ft/min (53.3 m/min)
Maximum Spindle Torque (Low at Maximum Engine RPM): 10000 ft-lb (13558.2 Nm)
Maximum Spindle Torque (Medium at Maximum Engine RPM): 6700 ft-lb (9084 Nm)
Maximum Spindle Torque (High at Maximum Engine RPM): 5000 ft-lb (6779.1 Nm)
Maximum Spindle Speed at Max Engine RPM: 180 rpm
Minimum Bore Diameter: 5" (12.7 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 3.2 mph (5.2 km/h)
Automated Rod Loader: Yes, semi-automated
Noise Level at Operator's Ear: 92
Drill Rack Angle: 33 deg
ELECTRICAL SYSTEM
Voltage: 12
Battery Group Class: 31
FLUID CAPACITIES
Fuel Tank: 75 gal (283.9 L)
Engine Crankcase with Filter: 20 qt (18.9 L)
Hydraulic Tank: 85 gal (321 .8 L)
Hydraulic System: 115 gal (435.3 L)
Engine Cooling System: 40 qt (37.9 L)
Antifreeze Tank Capacity: 4 gal (15.1 L)
HYDRAULIC SYSTEM
Auxiliary Pump Flow at Maximum Engine RPM: 20 gpm
Auxiliary Pump Relief Pressure: 3000 psi (206.8 bar)
Thrust/Pullback Pump Flow at Max Engine RPM: 45 gpm (170.3 L/min)
Thrust/Pullback Pump Relief Pressure: 5850 psi (403.3 bar)
Rotation Pump Flow at Maximum Engine RPM: 60 gpm (227.1 L/min)
Rotation Pump Relief Pressure: 5400 psi (372.3 bar)
Hydraulic Supply Filter Rating: 200
Hydraulic Return Filter Rating: 5
DRILLING FLUID SYSTEM OPTION ONE
Maximum Flow: 150 gpm (567.8 L/min)
Maximum Pressure: 1100 psi (75.8 bar)
DRILLING FLUID SYSTEM OPTION TWO
Maximum Flow: 200 gpm (757.1 L/min)
Maximum Pressure: 1100 psi (75.8 bar)
DRILLING FLUID SYSTEM OPTION THREE
Maximum Flow: 200 gpm (757.1 L/min)
Maximum Pressure: 1100 psi (75.8 bar)
Brand: Aplex
DRILLING FLUID SYSTEM OPTION FOUR
On Board Tank Capacity: 200 gal (757.1 L)
Brand: Kerr
Maximum Pressure: 1100 psi (75.8 bar)
CRANE
Weight: 2500 lbs (1134 kg)
Maximum Lifting Capacity: 7530 lbs (3415.6 kg)
Maximum Lifting Capacity - Boom Extended/Max Reach: 2350 lbs (1065.9 kg)
Rotation: 200 deg
Maximum Reach: 246" (624.8 cm)
Wireless Remote: Yes
FEATURES
Breakout System: Yes - hydraulic
Drilling Lights: Standard
Flow Indicator: Yes
Stakedown System: Optional
Cab: Standard
Strike Alert: Yes
-*2015 MARCH*-
GENERAL DIMENSIONS AND WEIGHTS
Length (Minimum Transport): 358" (909.3 cm)
Width (With Cab, Minimum Transport): 93" (236.2 cm)
Height (Minimum Transport): 118" (299.7 cm)
Weight: 42500 lbs (19277.7 kg)
ENGINE
Make and Model: John Deere PowerTech PE6068H200
Fuel Type: Diesel
Maximum Engine RPM: 2400 rpm
Idle Speed: 800 rpm
Rated RPM: 2400 rpm
Gross Horsepower: 200 hp (149.1 kw)
Net Horsepower: 180 hp (134.2 kw)
Torque (Maximum): 569 ft-lb (771.5 Nm)
Displacement: 415 cu-in (6.8 L)
Number of Cylinders: 6
Cooling Method: CAC air to air
Aspiration: Turbocharged
Max Fuel Consumption: 10.4 gph (39.3 lph)
Air Cleaner: Donaldson RadialSeal FRG130097
EPA Certification Family: Tier 3
Maximum Operating Angle (Fore/Aft)*: 25 continuous
Maximum Operating Angle (Left/Right)*: 25 continuous
OPERATIONAL
Thrust: 80000 lbs (36287.4 kg)
Pullback: 80000 lbs (36287.4 kg)
Maximum Carriage Speed at Maximum Engine RPM: 175 ft/min (53.3 m/min)
Maximum Spindle Torque (Low at Maximum Engine RPM): 10000 ft-lb (13558.2 Nm)
Maximum Spindle Torque (Medium at Maximum Engine RPM): 6700 ft-lb (9084 Nm)
Maximum Spindle Torque (High at Maximum Engine RPM): 5000 ft-lb (6779.1 Nm)
Maximum Spindle Speed at Max Engine RPM: 180 rpm
Minimum Bore Diameter: 5" (12.7 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 3.2 mph (5.2 km/h)
Automated Rod Loader: Yes, semi-automated
Noise Level at Operator's Ear: 92
Drill Rack Angle: 33 deg
ELECTRICAL SYSTEM
Voltage: 12
Battery Group Class: 31
FLUID CAPACITIES
Fuel Tank: 75 gal (283.9 L)
Engine Crankcase with Filter: 20 qt (18.9 L)
Hydraulic Tank: 85 gal (321.8 L)
Hydraulic System: 115 gal (435.3 L)
Engine Cooling System: 40 qt (37.9 L)
Antifreeze Tank Capacity: 4 gal (15.1 L)
HYDRAULIC SYSTEM
Auxiliary Pump Flow at Maximum Engine RPM: 20 gpm
Auxiliary Pump Relief Pressure: 3000 psi (206.8 bar)
Thrust/Pullback Pump Flow at Max Engine RPM: 45 gpm (170.3 L/min)
Thrust/Pullback Pump Relief Pressure: 5850 psi (403.3 bar)
Rotation Pump Flow at Maximum Engine RPM: 60 gpm (227.1 L/min)
Rotation Pump Relief Pressure: 5400 psi (372.3 bar)
Hydraulic Supply Filter Rating: 200
Hydraulic Return Filter Rating: 5
DRILLING FLUID SYSTEM OPTION ONE
Maximum Flow: 150 gpm (567.8 L/min)
Maximum Pressure: 1100 psi (75.8 bar)
DRILLING FLUID SYSTEM OPTION TWO
Maximum Flow: 200 gpm (757.1 L/min)
Maximum Pressure: 1100 psi (75.8 bar)
DRILLING FLUID SYSTEM OPTION THREE
Maximum Flow: 200 gpm (757.1 L/min)
Maximum Pressure: 1100 psi (75.8 bar)
Brand: Aplex
DRILLING FLUID SYSTEM OPTION FOUR
On Board Tank Capacity: 200 gal (757.1 L)
Brand: Kerr
Maximum Pressure: 1100 psi (75.8 bar)
CRANE
Weight: 2500 lbs (1134 kg)
Maximum Lifting Capacity: 7530 lbs (3415.6 kg)
Maximum Lifting Capacity - Boom Extended/Max Reach: 2350 lbs (1065.9 kg)
Rotation: 200 deg
Maximum Reach: 246" (624.8 cm)
Wireless Remote: Yes
FEATURES
Breakout System: Yes- hydraulic
Drilling Lights: Standard
Flow Indicator: Yes
Stakedown System: Optional
Cab: Standard
Strike Alert: Yes
-*2009*-
GENERAL
Length: 30"(9.1 m)
Width (transport): 93" (236.2 cm)
Height: 118" (299.7 cm)
Height (crane option): 11' (3.4 m)
Weight (without drill rod): 36,600 lb (16,601.5 kg)
POWER
Engine: John Deere 6068 Tier 3
Gross power rating: 200 hp (149.1 kW)
Rated rpm: 2400
FLUID CAPACITIES
Engine oil (including filter): 5 gal (18.9 L)
Fuel tank: 75 gal (284 L)
Hydraulic tank: 85 gal (321.8 L)
Weight (crane option, short rod box): 43,000 lb (19,504.5 kg)
OPERATIONAL
Max spindle torque:
-Low: 10,000 ft-lb (13,558.2 Nm)
-Medium: 6700 ft-lb (9084 Nm)
-High: 5000 ft-lb (6779.1 Nm)
Max spindle speed: 180 rpm
Thrust: 80,000 lb (36,287.4 kg)
Pullback: 80,000 lb (36,287.4 kg)
Min bore diameter: 5" (12.7 cm)
Max ground drive speed: 3.2 mph (5.1 km/h)
Max carriage speed: 175 fpm (53.3 m/min)
Drill rack angle: 22° – 33°
Remote lockout: Yes
Electrical strike alert: Yes
DRILLING FLUID SYSTEM
Max flow: 150 or 200 gpm (567.8 or 757.1 L/min)
Max pressure: 1100 psi (75.8 bar)
CRANE
Max lifting capacity: 7530 lb (3415.6 kg)
Max lifting capacity (at full reach): 2350 lb (1065.9 kg)
Rotation: 200 degrees
Max reach: 20.6' (6.3 m)
FEATURES
Breakout system: Power vise
Drilling lights
Flow indicator
DRILL STEM
Type: Firestick
Length: 15' (4.6 m)
Joint diameter: 3.625" (9.2 cm)
Pipe diameter: 3.5" (8.9 cm)
Weight: 250 lb (113.4 kg)
Clip weight (12 rod): 3600 lb (1632.9 kg)
(24 rod): 6600 lb (2993.7 kg) / less rod box
Min bend radius: 197.4' (60.2 m)
Rod carrying capacity (24 rod): 360' (109.7 m)
-*2005*-
GENERAL
Length: 358" (909 cm)
Width (fixed tracks): 93" (236 cm)
Height: 118" (300 cm)
Weight: 37,500 lb (17,010 kg)
OPERATIONAL
Max spindle torque:
@ 90 rpm: 10,000 ft-lb (13,558 Nm)
@ 120 rpm: 6700 ft-lb (9084 Nm)
@ 180 rpm: 5000 ft-lb (6779 Nm)
Max spindle speed: 180 rpm
Thrust (actual): 80,000 lb (36,287 kg)
Pullback (actual): 80,000 lb (36,287 kg)
Min bore diameter: 5" (13 cm)
Max ground drive speed: 3.2 mph (5.1 km/h)
Max carriage speed: 175 fpm (53.3 m/min)
Drill rack angle: 22 – 33°
Remote lockout: Yes
DRILLING FLUID SYSTEM
Max flow: 150 or 200 gpm (568 or 757 L/min)
Max pressure: 1100 psi (76 bar)
FEATURES
Breakout system: Power vise
Drilling lights
Flow indicator
DRILL STEM
Type: FIRESTICK I
Length: 15' (4.6 m)
Joint diameter: 3.625" (9.2 cm)
Pipe diameter: 3.5" (9 cm)
Weight: 250 lb (114 kg)
Clip Weight -
-(12 rod): 3600 lb (1633 kg)
-(24 rod): 6600 lb (2994 kg) / less rod box
Min bend radius: 197.4' (60 m)
Rod Carrying Capacity:
-(12 rod): 180' (55 m)
-(24 rod): 360' (110 m)
Type: FIRESTICK II
Length: 15' (4.6 m)
Joint diameter: 3.86" (9.8 cm)
Pipe diameter: 2.96" (7.3 cm)
Weight: 200 lb (91 kg)
Clip Weight:
-(12 rod): 2400 lb (1089 kg)
-(24 rod): 4800 lb (2268 kg) / less rod box
Min bend radius: 168.7' (51.4 m)
Rod Carrying Capacity:
-(12 rod): 180' (55 m)
-(24 rod): 360' (110 m)
POWER
Engine: John Deere 6068
Gross power rating: 200 hp (149 kW)
Net power rating: 180 hp (139 kW)
Rated rpm: 2400
FLUID CAPACITIES
Engine oil (including filter): 33 qt (31 L)
Fuel tank: 75 gal (284 L)
Hydraulic reservoir: 85 gal (322 L)
FEATURES AND BENEFITS
Feature: 10,000 ft-lbs of Rotational Torque
Benefit: With 10,000 ft-lbs (13,558 Nm) of torque, this machine has enough power to turn cutting tools in demanding soil conditions and longer distances and to accommodate larger backreamers.
Feature: On-Board Pump
Benefit: The on-board pump provides high flow for mud motors and hole openers and increases backreaming efficiency on larger diameter backreams. All pump options are piston type with piston wash.
Feature: 80,000 lbs Pullback
Benefit: The D80x100 Series II has sufficient pullback to handle longer, heavier product.
Feature: Rack and Pinion Drive
Benefit: This simple system provides smooth operation. The D80x100 Series II's unique narrow rack and pinion design helps to maintain a small footprint for access into congested areas.
The rack is sectionalized and bolts on for easy repair or replacement.
Feature: Adjustable Speed Controls for Thrust, Pullback, and Rotation
Benefit: Adjustable controls allow the operator to dial in different drilling inputs without the need for constant feathering of the controls.
Feature: Large Water Course
Benefit: A 1.875" water course through the head shaft and drive chuck and 2.0" water course through the drill stem upset provide a large water course for obtaining high flow capabilities.
GENERAL DIMENSIONS AND WEIGHTS
Length (Minimum Transport): 358" (909.3 cm)
Width (With Cab, Minimum Transport): 93" (236.2 cm)
Height (Minimum Transport): 118" (299.7 cm)
Weight: 42500 lbs (19277.7 kg)
ENGINE
Make and Model: John Deere PowerTech PE6068H200
Fuel Type: Diesel
Maximum Engine RPM: 2400 rpm
Idle Speed: 800 rpm
Rated RPM: 2400 rpm
Gross Horsepower: 200 hp (149.1 kw)
Net Horsepower: 180 hp (134.2 kw)
Torque (Maximum): 569 ft-lb (771 .5 Nm)
Displacement: 415 cu-in (6.8 L)
Number of Cylinders: 6
Cooling Method: CAC air to air
Aspiration: Turbocharged
Max Fuel Consumption: 10.4 gph (39.3 Iph)
Air Cleaner: Donaldson RadialSeal FRG130097
EPA Certification Family: Tier 3
Maximum Operating Angle (Fore/Aft)*: 25 continuous
Maximum Operating Angle (Left/Right)*: 25 continuous
OPERATIONAL
Thrust: 80000 lbs (36287.4 kg)
Pullback: 80000 lbs (36287.4 kg)
Maximum Carriage Speed at Maximum Engine RPM: 175 ft/min (53.3 m/min)
Maximum Spindle Torque (Low at Maximum Engine RPM): 10000 ft-lb (13558.2 Nm)
Maximum Spindle Torque (Medium at Maximum Engine RPM): 6700 ft-lb (9084 Nm)
Maximum Spindle Torque (High at Maximum Engine RPM): 5000 ft-lb (6779.1 Nm)
Maximum Spindle Speed at Max Engine RPM: 180 rpm
Minimum Bore Diameter: 5" (12.7 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 3.2 mph (5.2 km/h)
Automated Rod Loader: Yes, semi-automated
Noise Level at Operator's Ear: 92
Drill Rack Angle: 33 deg
ELECTRICAL SYSTEM
Voltage: 12
Battery Group Class: 31
FLUID CAPACITIES
Fuel Tank: 75 gal (283.9 L)
Engine Crankcase with Filter: 20 qt (18.9 L)
Hydraulic Tank: 85 gal (321 .8 L)
Hydraulic System: 115 gal (435.3 L)
Engine Cooling System: 40 qt (37.9 L)
Antifreeze Tank Capacity: 4 gal (15.1 L)
HYDRAULIC SYSTEM
Auxiliary Pump Flow at Maximum Engine RPM: 20 gpm
Auxiliary Pump Relief Pressure: 3000 psi (206.8 bar)
Thrust/Pullback Pump Flow at Max Engine RPM: 45 gpm (170.3 L/min)
Thrust/Pullback Pump Relief Pressure: 5850 psi (403.3 bar)
Rotation Pump Flow at Maximum Engine RPM: 60 gpm (227.1 L/min)
Rotation Pump Relief Pressure: 5400 psi (372.3 bar)
Hydraulic Supply Filter Rating: 200
Hydraulic Return Filter Rating: 5
DRILLING FLUID SYSTEM OPTION ONE
Maximum Flow: 150 gpm (567.8 L/min)
Maximum Pressure: 1100 psi (75.8 bar)
DRILLING FLUID SYSTEM OPTION TWO
Maximum Flow: 200 gpm (757.1 L/min)
Maximum Pressure: 1100 psi (75.8 bar)
DRILLING FLUID SYSTEM OPTION THREE
Maximum Flow: 200 gpm (757.1 L/min)
Maximum Pressure: 1100 psi (75.8 bar)
Brand: Aplex
DRILLING FLUID SYSTEM OPTION FOUR
On Board Tank Capacity: 200 gal (757.1 L)
Brand: Kerr
Maximum Pressure: 1100 psi (75.8 bar)
CRANE
Weight: 2500 lbs (1134 kg)
Maximum Lifting Capacity: 7530 lbs (3415.6 kg)
Maximum Lifting Capacity - Boom Extended/Max Reach: 2350 lbs (1065.9 kg)
Rotation: 200 deg
Maximum Reach: 246" (624.8 cm)
Wireless Remote: Yes
FEATURES
Breakout System: Yes - hydraulic
Drilling Lights: Standard
Flow Indicator: Yes
Stakedown System: Optional
Cab: Standard
Strike Alert: Yes
-*2015 MARCH*-
GENERAL DIMENSIONS AND WEIGHTS
Length (Minimum Transport): 358" (909.3 cm)
Width (With Cab, Minimum Transport): 93" (236.2 cm)
Height (Minimum Transport): 118" (299.7 cm)
Weight: 42500 lbs (19277.7 kg)
ENGINE
Make and Model: John Deere PowerTech PE6068H200
Fuel Type: Diesel
Maximum Engine RPM: 2400 rpm
Idle Speed: 800 rpm
Rated RPM: 2400 rpm
Gross Horsepower: 200 hp (149.1 kw)
Net Horsepower: 180 hp (134.2 kw)
Torque (Maximum): 569 ft-lb (771.5 Nm)
Displacement: 415 cu-in (6.8 L)
Number of Cylinders: 6
Cooling Method: CAC air to air
Aspiration: Turbocharged
Max Fuel Consumption: 10.4 gph (39.3 lph)
Air Cleaner: Donaldson RadialSeal FRG130097
EPA Certification Family: Tier 3
Maximum Operating Angle (Fore/Aft)*: 25 continuous
Maximum Operating Angle (Left/Right)*: 25 continuous
OPERATIONAL
Thrust: 80000 lbs (36287.4 kg)
Pullback: 80000 lbs (36287.4 kg)
Maximum Carriage Speed at Maximum Engine RPM: 175 ft/min (53.3 m/min)
Maximum Spindle Torque (Low at Maximum Engine RPM): 10000 ft-lb (13558.2 Nm)
Maximum Spindle Torque (Medium at Maximum Engine RPM): 6700 ft-lb (9084 Nm)
Maximum Spindle Torque (High at Maximum Engine RPM): 5000 ft-lb (6779.1 Nm)
Maximum Spindle Speed at Max Engine RPM: 180 rpm
Minimum Bore Diameter: 5" (12.7 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 3.2 mph (5.2 km/h)
Automated Rod Loader: Yes, semi-automated
Noise Level at Operator's Ear: 92
Drill Rack Angle: 33 deg
ELECTRICAL SYSTEM
Voltage: 12
Battery Group Class: 31
FLUID CAPACITIES
Fuel Tank: 75 gal (283.9 L)
Engine Crankcase with Filter: 20 qt (18.9 L)
Hydraulic Tank: 85 gal (321.8 L)
Hydraulic System: 115 gal (435.3 L)
Engine Cooling System: 40 qt (37.9 L)
Antifreeze Tank Capacity: 4 gal (15.1 L)
HYDRAULIC SYSTEM
Auxiliary Pump Flow at Maximum Engine RPM: 20 gpm
Auxiliary Pump Relief Pressure: 3000 psi (206.8 bar)
Thrust/Pullback Pump Flow at Max Engine RPM: 45 gpm (170.3 L/min)
Thrust/Pullback Pump Relief Pressure: 5850 psi (403.3 bar)
Rotation Pump Flow at Maximum Engine RPM: 60 gpm (227.1 L/min)
Rotation Pump Relief Pressure: 5400 psi (372.3 bar)
Hydraulic Supply Filter Rating: 200
Hydraulic Return Filter Rating: 5
DRILLING FLUID SYSTEM OPTION ONE
Maximum Flow: 150 gpm (567.8 L/min)
Maximum Pressure: 1100 psi (75.8 bar)
DRILLING FLUID SYSTEM OPTION TWO
Maximum Flow: 200 gpm (757.1 L/min)
Maximum Pressure: 1100 psi (75.8 bar)
DRILLING FLUID SYSTEM OPTION THREE
Maximum Flow: 200 gpm (757.1 L/min)
Maximum Pressure: 1100 psi (75.8 bar)
Brand: Aplex
DRILLING FLUID SYSTEM OPTION FOUR
On Board Tank Capacity: 200 gal (757.1 L)
Brand: Kerr
Maximum Pressure: 1100 psi (75.8 bar)
CRANE
Weight: 2500 lbs (1134 kg)
Maximum Lifting Capacity: 7530 lbs (3415.6 kg)
Maximum Lifting Capacity - Boom Extended/Max Reach: 2350 lbs (1065.9 kg)
Rotation: 200 deg
Maximum Reach: 246" (624.8 cm)
Wireless Remote: Yes
FEATURES
Breakout System: Yes- hydraulic
Drilling Lights: Standard
Flow Indicator: Yes
Stakedown System: Optional
Cab: Standard
Strike Alert: Yes
-*2009*-
GENERAL
Length: 30"(9.1 m)
Width (transport): 93" (236.2 cm)
Height: 118" (299.7 cm)
Height (crane option): 11' (3.4 m)
Weight (without drill rod): 36,600 lb (16,601.5 kg)
POWER
Engine: John Deere 6068 Tier 3
Gross power rating: 200 hp (149.1 kW)
Rated rpm: 2400
FLUID CAPACITIES
Engine oil (including filter): 5 gal (18.9 L)
Fuel tank: 75 gal (284 L)
Hydraulic tank: 85 gal (321.8 L)
Weight (crane option, short rod box): 43,000 lb (19,504.5 kg)
OPERATIONAL
Max spindle torque:
-Low: 10,000 ft-lb (13,558.2 Nm)
-Medium: 6700 ft-lb (9084 Nm)
-High: 5000 ft-lb (6779.1 Nm)
Max spindle speed: 180 rpm
Thrust: 80,000 lb (36,287.4 kg)
Pullback: 80,000 lb (36,287.4 kg)
Min bore diameter: 5" (12.7 cm)
Max ground drive speed: 3.2 mph (5.1 km/h)
Max carriage speed: 175 fpm (53.3 m/min)
Drill rack angle: 22° – 33°
Remote lockout: Yes
Electrical strike alert: Yes
DRILLING FLUID SYSTEM
Max flow: 150 or 200 gpm (567.8 or 757.1 L/min)
Max pressure: 1100 psi (75.8 bar)
CRANE
Max lifting capacity: 7530 lb (3415.6 kg)
Max lifting capacity (at full reach): 2350 lb (1065.9 kg)
Rotation: 200 degrees
Max reach: 20.6' (6.3 m)
FEATURES
Breakout system: Power vise
Drilling lights
Flow indicator
DRILL STEM
Type: Firestick
Length: 15' (4.6 m)
Joint diameter: 3.625" (9.2 cm)
Pipe diameter: 3.5" (8.9 cm)
Weight: 250 lb (113.4 kg)
Clip weight (12 rod): 3600 lb (1632.9 kg)
(24 rod): 6600 lb (2993.7 kg) / less rod box
Min bend radius: 197.4' (60.2 m)
Rod carrying capacity (24 rod): 360' (109.7 m)
-*2005*-
GENERAL
Length: 358" (909 cm)
Width (fixed tracks): 93" (236 cm)
Height: 118" (300 cm)
Weight: 37,500 lb (17,010 kg)
OPERATIONAL
Max spindle torque:
@ 90 rpm: 10,000 ft-lb (13,558 Nm)
@ 120 rpm: 6700 ft-lb (9084 Nm)
@ 180 rpm: 5000 ft-lb (6779 Nm)
Max spindle speed: 180 rpm
Thrust (actual): 80,000 lb (36,287 kg)
Pullback (actual): 80,000 lb (36,287 kg)
Min bore diameter: 5" (13 cm)
Max ground drive speed: 3.2 mph (5.1 km/h)
Max carriage speed: 175 fpm (53.3 m/min)
Drill rack angle: 22 – 33°
Remote lockout: Yes
DRILLING FLUID SYSTEM
Max flow: 150 or 200 gpm (568 or 757 L/min)
Max pressure: 1100 psi (76 bar)
FEATURES
Breakout system: Power vise
Drilling lights
Flow indicator
DRILL STEM
Type: FIRESTICK I
Length: 15' (4.6 m)
Joint diameter: 3.625" (9.2 cm)
Pipe diameter: 3.5" (9 cm)
Weight: 250 lb (114 kg)
Clip Weight -
-(12 rod): 3600 lb (1633 kg)
-(24 rod): 6600 lb (2994 kg) / less rod box
Min bend radius: 197.4' (60 m)
Rod Carrying Capacity:
-(12 rod): 180' (55 m)
-(24 rod): 360' (110 m)
Type: FIRESTICK II
Length: 15' (4.6 m)
Joint diameter: 3.86" (9.8 cm)
Pipe diameter: 2.96" (7.3 cm)
Weight: 200 lb (91 kg)
Clip Weight:
-(12 rod): 2400 lb (1089 kg)
-(24 rod): 4800 lb (2268 kg) / less rod box
Min bend radius: 168.7' (51.4 m)
Rod Carrying Capacity:
-(12 rod): 180' (55 m)
-(24 rod): 360' (110 m)
POWER
Engine: John Deere 6068
Gross power rating: 200 hp (149 kW)
Net power rating: 180 hp (139 kW)
Rated rpm: 2400
FLUID CAPACITIES
Engine oil (including filter): 33 qt (31 L)
Fuel tank: 75 gal (284 L)
Hydraulic reservoir: 85 gal (322 L)
FEATURES AND BENEFITS
Feature: 10,000 ft-lbs of Rotational Torque
Benefit: With 10,000 ft-lbs (13,558 Nm) of torque, this machine has enough power to turn cutting tools in demanding soil conditions and longer distances and to accommodate larger backreamers.
Feature: On-Board Pump
Benefit: The on-board pump provides high flow for mud motors and hole openers and increases backreaming efficiency on larger diameter backreams. All pump options are piston type with piston wash.
Feature: 80,000 lbs Pullback
Benefit: The D80x100 Series II has sufficient pullback to handle longer, heavier product.
Feature: Rack and Pinion Drive
Benefit: This simple system provides smooth operation. The D80x100 Series II's unique narrow rack and pinion design helps to maintain a small footprint for access into congested areas.
The rack is sectionalized and bolts on for easy repair or replacement.
Feature: Adjustable Speed Controls for Thrust, Pullback, and Rotation
Benefit: Adjustable controls allow the operator to dial in different drilling inputs without the need for constant feathering of the controls.
Feature: Large Water Course
Benefit: A 1.875" water course through the head shaft and drive chuck and 2.0" water course through the drill stem upset provide a large water course for obtaining high flow capabilities.
Questa informazione è fornita solo a scopo informativo. HDD Broker LLC non può garantire l'accuratezza o la completezza di queste informazioni. Queste informazioni sono soggette a modifiche da parte del produttore. Alcune specifiche possono variare a seconda dell'anno modello.