Questa pagina è stata tradotta utilizzando Google Traduttore

Libreria delle specifiche delle apparecchiature

Informazioni di base sul modello

  • Produttore:
    Vermeer
  • Modello:
    D10x15
  • Dimensione dell'attrezzatura:
    0 - 10,000 lbs Pullback

Visualizza produttori Visualizza i modelli

Specificazioni

Pump Pressure 750 psi
Entry Angle 16 degrees
Fuel Tank Capacity 17 gal 64.4 L
Min Bore Diameter 3" 7.6 cm
Pump Output 13.5 gpm
Thrust 10000 lbs 4535.9 kg
Hydraulic Tank Capacity 23 gal 87.1 L
Rod Loader yes - optional
Rod Carrying Capacity 440'
Type Forged
Drill Stem 10' 0'' 3m
Max Carriage Speed 90 ft/min 27.4 m/min
Max Spindle Speed 180 rpm 180 rpm
Pullback 10000 lbs 4535.9 kg
Length 10 Ft. 3 m
Ground Drive Speed 1.5 mph 2.4 km/h
Joint Diameter 42 mm
Weight 8980 lbs 4073.3 kg
Max Flow 13.5 gpm 51.1 L/min
Weight 17 kg
Length 15' 8'' 478 cm
Max Pressure 750 psi 51.7 bar
Min Bend Radius 29.1 m
Height 86.5'' 219.7 cm
Make and Model Perkins
Fluid Tank 55 gal 208.2 L
Width 35.5'' 91cm
Manufacturer's Gross HP Rating 50 hp 37.3 kw
Pipe Diameter 1.66” 4 cm
Engine Perkins
Rated Engine RPM 3000 rpm 3000 rpm

Informazioni addizionali

Oil-well drilling installation
Length: 478 cm
Width: 91 - 124 cm
with linkage change mechanism: 107 - 124 cm
Height (in operating position): 219.7 cm
Operating weight
with linkage box: 3447 kg
with linkage box and
autom. Linkage change-over switch: 3946 kg
hydr. Tightening device: Yes
Driving speed: 2,4 km/h
integrated drill pipes: Yes
autom. Linkage change-over switch: (optionally)
stationary anchoring system: Yes
Work slip thrower: Yes

Operational data
max. Number of revolutions: 180 U/min.
max. Torque: 2031 Nm
effect. Feed motion u. Pull-back power: 4536 kg
electrical. System: 12 V

Suspension system
Option 1:
max. Mechanical handling capacity: 51.10 l/min.
Option 2:
Use of other high pressure suspension plants
possible.

Drive
Engine: Perkins®
Achievement: 50 PS/37 KW
max. Revolutions: 3000 U/min.

Drill pipes
one-piece forged: Yes
Single length: 3 m
Diameter: 42 mm
Bending radius: 29.1 m
Weight: 17 kg

Drilling parameter
min. Hole diameter: 80 mm
The drilling head works with all well-known
Detection systems.
max. Drilling length varies *)
*) Dependent on ground condition,
Hole diameter and weight too
shifting product.

Amount of filling
Hydraulic oil: 87 l
Engine oil inclusive. Filter 8.2 l
Fuel: 64 l

---------------------

DIMENSIONS AND WEIGHTS
Weight: 8980 lbs (4073.3 kg)

ENGINE
Make and Model: Perkins
Maximum Engine RPM: 3000 rpm
Gross Horsepower: 50 hp (37.3 kw)
Net Horsepower: 47 hp (35.1 kw)

OPERATIONAL
Thrust: 10000 lbs (4535.9 kg)
Pullback: 10000 lbs (4535.9 kg)
Maximum Carriage Speed at Maximum Engine RPM: 90 ft/min (27.4 m/min)
Maximum Spindle Speed at Max Engine RPM: 180 rpm
Minimum Bore Diameter: 3 " (7.6 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 1.5 mph (2.4 km/h)
Automated Rod Loader: Yes- optional
Drill Rack Angle: 16 deg

FLUID CAPACITIES
Fuel Tank: 17 gal (64.4 L)
Engine Crankcase with Filter: 8.7 qt (8.2 L)
Hydraulic Tank: 23 gal (87.1 L)
Drilling Fluid System Option One
Maximum Flow: 13.5 gpm (51.1 L/min)
Maximum Pressure: 750 psi (51.7 bar)
On Board Tank Capacity: 55 gal (208.2 L)

FEATURES
Breakout System: Hydraulic - open top
Stakedown System: Yes - stationary

Visualizza produttori Visualizza i modelli

Questa informazione è fornita solo a scopo informativo. HDD Broker LLC non può garantire l'accuratezza o la completezza di queste informazioni. Queste informazioni sono soggette a modifiche da parte del produttore. Alcune specifiche possono variare a seconda dell'anno modello.

HDD Broker utilizza i cookie e raccoglie informazioni personali sui propri siti web.

Per ulteriori informazioni, consultare la Politica sulla privacy e l'Informativa sui cookie di HDD Broker. Facendo clic su "Accetto", si indica di aver regolato le impostazioni del browser in base alle proprie preferenze e di consentire l'uso dei cookie da parte dell'HDD Broker.

x