Questa pagina è stata tradotta utilizzando Google Traduttore

Libreria delle specifiche delle apparecchiature

Informazioni di base sul modello

  • Produttore:
    Vermeer
  • Modello:
    D8x12
  • Dimensione dell'attrezzatura:
    0 - 10,000 lbs Pullback

Visualizza produttori Visualizza i modelli Torna alla lista

Specificazioni

Thrust 7850 lb 3563.9 kg
Weight 18 lb 8.2 kg
Max Spindle Speed 182 rpm 182 rpm
Emissions Compliance Tier 4 Final (Stage IV) Tier 4 Final (Stage IV)
Width 35.5" 90.2 cm
Joint Inside Diameter 0.8" 2 cm
Joint Diameter 1.88" 4.8 cm
Entry Angle 18 deg
Height 65" 165.1 cm
Weight 6000 lb 2721.6 kg
Weight of Pipe and Small Box 180' 54.9 m
Type Firestick drill rod (#200)
Length 6" 1.8 m
Hydraulic Tank Capacity 25 gal 94.6 L
Rated Engine RPM 2200 rpm 2200 rpm
Manufacturer's Gross HP Rating 48 hp 35.8 kW
Length 139" 353.1 cm
Pipe Diameter 1.31" 3.3 cm
Max Carriage Speed 159 fpm 48.5 m/min
Fuel Type Ultra-low sulfur diesel
Pullback 7850 lb 3563.9 kg
Min Bore Diameter 2.5" 6.4 cm
Max Spindle Torque 1200 ft-lb 1627 Nm
Min Bend Radius 57' 17.4 m
Fuel Tank Capacity 15 gal 56.7 L
Make and Model Kohler KDI1903

Informazioni addizionali

GENERAL WEIGHTS AND DIMENSIONS
Min transport length: 139" (353.1 cm)
Min transport width: 35.5" (90.2 cm)
Min transport height: 65" (165.1 cm)
Min weight: 6000 lb (2721.6 kg)
Max weight: 6600 lb (2993.7 kg)
Angle of approach: 18 deg
Angle of departure: 20 deg

ENGINE
Make and model: Kohler KDI1903
Fuel type: Ultra-low sulfur diesel
Max engine rpm: 2200 rpm
Gross horsepower: 48 hp (35.8 kW)
Aspiration at full engine load: Turbocharged
Max fuel consumption: 2.5 gph (9.4 lph)
Emissions rating: Tier 4 Final (Stage IV)
Max operating angle (fore/aft): 25 deg
Max operating angle (left/right): 25 deg

OPERATIONAL
Thrust rod: 7850 lb (3563.9 kg)
Pullback rod: 7850 lb (3563.9 kg)
Max carriage speed at max engine rpm - fpm (m/min): 159 fpm (48.5 m/min)
Max spindle torque (max engine rpm) - ft-lb (Nm): 1200 ft-lb (1627 Nm)
Max spindle torque - smaller rod option (max engine rpm) - ft-lb (Nm): 900 ft-lb (1220 Nm)
Max spindle speed at max engine rpm - (rpm): 182 rpm
Min bore diameter: 2.5" (6.4 cm)
Max ground drive speed at max engine rpm - mph: 2.8 mph (4.5 km/h)
Noise level at operator’s ear: 85 dB(A)
Guaranteed sound power engine: 104 dB(A)

FLUID CAPACITIES
Fuel tank: 15 gal (56.7 L)
Hydraulic system: 25 gal (94.6 L)

DRILLING FLUID SYSTEM
Max flow: 9 gpm (34.1 L/min)
Max pressure: 750 psi (50.2 bar)
Brand: FMC
Onboard tank capacity: 25 gal

FEATURES
Breakout system: Standard hydraulic vise
Drilling lights: Optional
Stakedown system: Standard
Strike Alert: Standard
Remote Lockout Control: Standard
Rod greaser: Optional
Wash wand: Optional

DRILL PIPE OPTION ONE
Thread type: Firestick drill rod (#200)
Length: 6" (1.8 m)
Rod diameter: 1.31" (3.3 cm)
Joint inside diameter: .8" (2 cm)
Joint outside diameter: 1.88" (4.8 cm)
Weight: 18 lb (8.2 kg)
Bend radius: 57' (17.4 m)
Total machine rod capacity: 180' (54.9 m)

DRILL PIPE OPTION TWO
Thread type: Firestick drill rod (#200)
Length: 6' (1.8 m)
Rod diameter: 1.66" (4.2 cm)
Joint inside diameter: .8" (2 cm)
Joint outside diameter: 1.88" (4.8 cm)
Weight: 26 lb (11.8 kg)
Bend radius: 95.5' (29.1 m)
Total machine rod capacity: 180' (54.9 m)

Visualizza produttori Visualizza i modelli Torna alla lista

Questa informazione è fornita solo a scopo informativo. HDD Broker LLC non può garantire l'accuratezza o la completezza di queste informazioni. Queste informazioni sono soggette a modifiche da parte del produttore. Alcune specifiche possono variare a seconda dell'anno modello.

HDD Broker utilizza i cookie e raccoglie informazioni personali sui propri siti web.

Per ulteriori informazioni, consultare la Politica sulla privacy e l'Informativa sui cookie di HDD Broker. Facendo clic su "Accetto", si indica di aver regolato le impostazioni del browser in base alle proprie preferenze e di consentire l'uso dei cookie da parte dell'HDD Broker.

x