Questa pagina è stata tradotta utilizzando Google Traduttore

Libreria delle specifiche delle apparecchiature

Informazioni di base sul modello

  • Produttore:
    Vermeer
  • Modello:
    D9x13 Series II
  • Dimensione dell'attrezzatura:
    0 - 10,000 lbs Pullback

Visualizza produttori Visualizza i modelli Torna alla lista

Specificazioni

Manufacturer's Gross HP Rating 47 hp 35 kW
Max Pressure 750 psi 51.7 bar
Weight 6300 lbs 2857.6 kg
Number of Cylinders 4
Rated Engine RPM 3000 rpm 3000 rpm
Fuel Tank Capacity 14 gal 64.4 L
Height 69" 175.3 cm
Torque 1,300 ft-lbs 1,762.6 Nm
Max Speed 3150 rpm
Displacement Turbocharged
Hydraulic Tank Capacity 24 gal 90.8 L
Length 12.5' 3.8 m
Pullback 9000 lbs 40 kN
Rod Loader No
Max Flow 9 gpm 34.1 L/min
Thrust 9000 lbs 40 kN
Engine Cooling System 5 qt 4.7 L
Rod Carrying Capacity 300' 91.4 m
Make and Model Kubota V1505T
Type Firestick
Fuel Type Diesel
Length 6' 1.8 m
Emissions Compliance Tier 4i (Stage IIIB) Tier 4i (Stage IIIB)
Pipe Diameter 1.66" 4.2 cm
Max Carriage Speed 140 ft/min 42.7 m/min
Weight 25 lbs 11.3 kg
Max Spindle Torque 1300 ft-lbs 1762.6 Nm
Min Bend Radius 95.5' 29.1 m
Width 35.5" 90.2 cm
Min Bore Diameter 2.5" 6.4cm
Fluid Tank 25 gal 94.6 L
Max Spindle Speed 175 rpm 175 rpm

Informazioni addizionali

-*2015*-

GENERAL DIMENSIONS & WEIGHTS
Length (Minimum Transport): 149.5" (379.7 cm)
Width (Minimum Transport): 35.5" (90.2 cm)
Height (Minimum Transport): 69" (175.3 cm)
Weight: 6300 lbs (2857.6 kg)

ENGINE
Make and Model: Kubota V1505T
Fuel Type: Diesel
Maximum Engine RPM: 3150 rpm
Idle Speed: 1100 rpm
Rated RPM: 3000 rpm
Gross Horsepower: 47 hp (35.1 kw)
Net Horsepower: 43 hp (32.1 kw)
Torque (Maximum): 88.5 ft-lb (120 Nm)
Displacement: 91.5 cu-in (1.5 L)
Number of Cylinders: 4
Cooling Method: Liquid
Aspiration: Turbocharged
Max Fuel Consumption: 2.4 gph (9.1 Iph)
Air Cleaner: Donaldson
EPA Certification Family: EPA Tier 4i
Maximum Operating Angle (Fore/Aft)*: 20
Maximum Operating Angle (Left/Right)*: 20

OPERATIONAL
Thrust: 9000 lbs (4082.3 kg)
Pullback: 9000 lbs (4082.3 kg)
Maximum Carriage Speed at Maximum Engine RPM: 140 ft/min (42.7 m/min)
Maximum Spindle Torque (Low at Maximum Engine RPM): 1300 ft-lb (1762.6 Nm)
Maximum Spindle Torque (High at Maximum Engine RPM): 860 ft-lb (1 166 Nm)
Maximum Spindle Speed at Max Engine RPM: 176 rpm
Minimum Bore Diameter: 2.5" (6.4 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 2.2 mph (3.5 km/h)
Automated Rod Loader: No
Noise Level at Operator's Ear: 87 dB(A)

ELECTRICAL SYSTEM
Voltage: 12
Battery CCA Rating: 800
Battery Group Class: 24

FLUID CAPACITIES
Fuel Tank: 14 gal (53 L)
Engine Crankcase with Filter: 7 qt (6.6 L)
Hydraulic Tank: 17 gal (64.4 L)
Hydraulic System: 24 gal (90.9 L)
Engine Cooling System: 5 qt (4.7 L)
Antifreeze Tank Capacity: 25 gal (94.6 L)

HYDRAULIC SYSTEM
Thrust/Pullback Pump Flow at Max Engine RPM: 30 gpm (113.6 L/min)
Thrust/Pullback Pump Relief Pressure: 3200 psi (220.6 bar)
Rotation Pump Flow at Maximum Engine RPM: 19.7 gpm (74.6 L/min)
Rotation Pump Relief Pressure: 2750 psi (189.6 bar)
Hydraulic Return Filter Rating: 5

DRILLING FLUID SYSTEM OPTION ONE
Maximum Flow: 9 gpm (34.1 L/min)
Maximum Pressure: 500 psi (34.5 bar)
On Board Tank Capacity: 25 gal (94.6 L)

DRILLING FLUID SYSTEM OPTION TWO
Maximum Flow: 15 gpm (56.8 L/min)
Maximum Pressure: 750 psi (51.7 bar)
On Board Tank Capacity: 25 gal (94.6 L)

FEATURES
Breakout System: Yes
Drilling Lights: No
Flow Indicator: Yes
Stakedown System: Yes
Cab: No

-*2013*-

GENERAL DIMENSIONS & WEIGHTS
Length: 12.5' (3.8 m)
Width (min transport): 35.5" (90.2 cm)
Width (max operation): 42.5"(108 cm)
Height: 69" (175.3 cm)
Weight (with drill rod): 6700 lb (2857.6 kg)

ENGINE
Make and model: Kubota V1505T
Gross horsepower: 47 hp (35 kW)
Aspiration: Turbocharged
Rated rpm: 3000
Emissions compliance: Tier 4i (Stage IIIB)

OPERATIONAL
Thrust/Pullback force: 9000 lb (40 kN)
Spindle torque (low at max engine rpm): 1300 ft-lb (1762.6 Nm)
Spindle torque (high at max engine rpm): 860 ft-lb (1166 Nm)
Max spindle speed (high): 175 rpm
Max spindle speed (low): 120 rpm
Max carriage travel speed at max engine rpm: 140 ft/min (42.7 m/min)

FLUID CAPACITIES
Fuel tank: 14 gal (53 L)
Hydraulic tank: 17 gal (64.4 gal)
Hydraulic system: 24 gal (90.8 gal)

DRILLING FLUID SYSTEM — OPTION ONE
Max flow: 9 gpm (34.1 L/min)
Max pressure: 750 psi (51.7 bar)
Onboard tank capacity: 25 gal (94.6 L)

DRILLING FLUID SYSTEM — OPTION TWO
Max flow: 15 gpm (56.8 L/min)
Max pressure: 750 psi (51.7 bar)
Onboard tank capacity: 25 gal (94.6 L)

DRILL ROD
Type: Firestick
Length: 6'(1.8 m)
Pipe diameter: 1.66"(4.2 cm)
Min bend radius: 95.5'(29.1 m)
Weight: 25 lb (11.3 kg)
Rod carrying capacity: 300'(91.4 m)

SAFETY
Electric strike alert: Standard
Remote lockout: Standard

--------------------

--DRILL--
Width (max operation): 42.5" (108 cm)
Weight (with drill rod): 6,300 lbs (2,857.6 kg)

--FLUID CAPACITIES--
Hydraulic system: 24 gal (90.8 L)

--OPERATIONAL--
Spindle torque (low at max engine RPM): 1,300 ft-lbs (1,762.6 Nm)
Spindle torque (high at max engine RPM): 860 ft-lbs (1,084.7 Nm)
Max spindle speed (high): 220 rpm
Max spindle speed (low): 140 rpm
Electrical strike alert: Yes
Remote lockout system: Yes

--DRILLING FLUID SYSTEM--
Max flow: 9 gpm (34.1 L/min) or 15 gpm (56.8 L/min)

EXTENDABLE TRACKS
With tracks positioned at the narrowest width, the D9x13 Series II measures just 35.5" (90.2 cm). This narrow profile allows for easy maneuvering within confined jobsites. To increase side-hill stability and ease of loading and unloading, the tracks extend outward to 42.5" (108 cm).

ROTATION SPEED
A two-speed rotational gearbox rated at spindle speeds of 220 rpm (high) and 140 rpm (low) helps enhance control and allows the operator to increase backreaming speed when conditions allow.

The D9x13 Series II easily handles jobs in confined spaces. At 35.5" (90.2 cm) in width, this rig has the narrowest footprint in its class. Rig is powered by a 47 hp (35 kW) Kubota diesel engine providing 9,000 lbs (40 kN) of thrust pullback force and 1,300 ft-lb (1,762.6 Nm) of torque. Ideal for sensitive surfaces thanks to an undercarriage with oversized tracks that help disperse machine weight evenly resulting in minimal surface disturbance. This unit can be equipped with a 9 gpm (34.1 L/min) or 15 gpm (56.8 L/min) pump.

Visualizza produttori Visualizza i modelli Torna alla lista

Questa informazione è fornita solo a scopo informativo. HDD Broker LLC non può garantire l'accuratezza o la completezza di queste informazioni. Queste informazioni sono soggette a modifiche da parte del produttore. Alcune specifiche possono variare a seconda dell'anno modello.

HDD Broker utilizza i cookie e raccoglie informazioni personali sui propri siti web.

Per ulteriori informazioni, consultare la Politica sulla privacy e l'Informativa sui cookie di HDD Broker. Facendo clic su "Accetto", si indica di aver regolato le impostazioni del browser in base alle proprie preferenze e di consentire l'uso dei cookie da parte dell'HDD Broker.

x